- Open : 24/7
- 1404 Colmar Ave, Pickering, ON L1W 1C3, Canada
- Open 24 Hours — 7 Days
- 1404 Colmar Ave, Pickering, ON
Most shower faults trace back to one of three places: the valve, the
drain, or the seal where the shower meets the wall and floor.
The mixing valve is what blends hot and cold. When the cartridge inside it wears, the temperature starts swinging — cold when someone runs a tap elsewhere, or refusing to reach hot at all. The drain collects hair and soap over the years and slows gradually enough that nobody notices until it pools. And a failed seal lets water past the surface, which is the one that does real damage, because it usually shows up as a stain on the ceiling below rather than in the bathroom.
A shower drain that empties slowly is almost always hair and soap build-up in the trap, and clearing it properly takes longer than pouring something down it but lasts considerably longer too.
Replacement is a different job. The drain body sits below the shower base and connects to the trap underneath, so replacing one means getting access from below where possible, or lifting the base where it is not. On a tiled shower that is not a small undertaking, which is why it is worth establishing what is actually wrong before committing to anything.
If water is backing up into the tray rather than draining slowly — particularly if it smells — the problem is further down the line and not the shower drain at all.
If the shower goes cold when someone runs a tap elsewhere in the house, or will not reach the temperature it used to, the mixing valve is the usual culprit. The cartridge inside wears over the years and stops balancing hot and cold properly.
Replacing a cartridge is a repair rather than a rebuild, and it is usually possible without opening the wall — provided the valve body itself is sound and parts are still available for that model. Older or discontinued valves sometimes need the whole assembly replaced, which does mean access from behind.
Tell us the make if you know it. It saves time and tells us whether parts are likely to be available.
We provide professional shower installation and repair services in Pickering for homeowners looking for reliable and long-lasting solutions. Our licensed plumbers handle everything from shower leak repair to complete shower replacement with careful workmanship and attention to detail.
Whether you need affordable shower installation or fast shower repair, we focus on quality service, honest pricing, and customer satisfaction. We make it easy to upgrade your bathroom and keep your shower working properly.
Ready to upgrade or repair your fixtures? Contact ayplumber.ca for fast, reliable plumbing solutions. Our team is here to help with expert service and honest pricing.
Shower problems often start small but can become bigger plumbing issues over time. A leaking shower, poor water pressure, or drainage problem can affect your daily routine and lead to water damage if left untreated. If your shower is old, damaged, or no longer working properly, it may be time for a repair or replacement.
If you notice any of these issues, contact AY Plumber for fast and Any of that sound familiar? Call 647-248-7755.
Tell us what is happening. Photos help if you have them.
We explain the likely cause and what the work involves.
Arrive at the agreed time, diagnose properly, confirm the price.
Work completed, area left clean, questions answered.
Book your plumbing service quickly and easily
Receive expert guidance for any plumbing issue
Our skilled team arrives ready to help
Enjoy reliable solutions and quality work
If you notice any of these issues, contact AY Plumber for fast and Call 647-248-7755 to get it sorted.
Stop dealing with plumbing hassles and costly surprises. Contact AY Plumber today for professional, reliable plumbing services in Toronto and the GTA—and experience the difference our expertise makes!
Have questions about our plumbing services? Explore quick answers to help you understand how we work and what we offer.
Usually a worn cartridge in the mixing valve, which stops balancing hot and cold properly. If it goes cold specifically when someone runs a tap elsewhere, that is the classic sign.
Yes. How involved it is depends on the access — some can be reached from below, others need the shower base lifted. We will tell you which you are looking at before starting.
A failed seal or a leaking joint, and worth looking at promptly. Water getting past the surface does its damage out of sight, so by the time it shows on the ceiling it has usually been going for a while.
Yes — the plumbing side: valves, drains, supply and waste connections. If it is part of a full bathroom renovation, that is worth discussing together rather than piecemeal.
You get the price before we start. A cartridge replacement and a valve rebuild are very different jobs, so the diagnosis comes first.
Location :
Email us :
Call us now :
Fed up with leaky pipes or surprise plumbing issues? At AY Plumber, we’re committed to solving your problems quickly and professionally
Copyright © 2026 AY Plumbing & Renovation Service Created by CrDeck
